BXQPL - FAST DRYING POLYURETHANE SEMIGLOSS
- MSDS: BXQPL
- Manufacturer: MINWAX CO INC
- Product Name: FAST DRYING POLYURETHANE SEMIGLOSS
- National Stock Number: 8010-00N059566
Product Identification
Product ID:FAST DRYING POLYURETHANE SEMIGLOSS
MSDS Date:11/24/1991
FSC:8010
NIIN:00N059566
MSDS Number: BXQPL
Responsible Party
MONTVALE, NJ 07645
US
Emergency Phone: 201-391-0253
Info Phone: 201-391-0253
Cage: HO333
Contractor
Telephone: 800-523-9299/216-566-2917
Cage: 0K1A4
Ingredients
STODDARD SOLVENT
CAS: 8052-41-3
RTECS: WJ8925000
Fraction By Weight: 53-61%
OSHA PEL 500 PPM
ACGIH TLV: 100 PPM
DIZZ, INCREASE FRESH AIR AND LEAVE AREA. REMOVE
RTECS: 9999999ZZ
REUSE. DO NOT TAKE INTERNALLY. KEEP OUT OF THE REACH
RTECS: 9999999ZZ
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE/CHRONIC: INGEST: GI IRRIT, NAUS,
VOMIT & DIARR. SKIN: DEFAT & DRYING OF SKIN WHICH MAY RSLT IN SKIN
IRRIT. EYES: SEV IRRIT, REDNESS, TEARING & BLURRED VISION. INHAL:
NASAL & RESP IRRIT, DIZZ, FA TIGUE, NAUS, HDCH, NERV IRRIT, UNCON &
ASPHY.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYES:REMOVE CONT LENS IF PRESENT. FLUSH EYES W/PLENTY OF
WATER FOR AT LEAST 15 MIN & GET MD ATTN. SKIN:WASH THORO W/SOAP &
PLENTY OF WATER. IF IRRIT PERSISTS GET MD ATTN. INGEST:DO NOT
INDUCE VOMIT. C ALL MD IMMED! KEEP PATIENT WARM & QUIET.
INHAL:REMOVE TO FRESH AIR. MAINTAIN RESP AS NEC & CALL MD. NOTE TO
MD:IF SWALLOWED, ASPIR OF MATL INTO LUNGS DUE TO VOMIT CAN CAUSE
PNEUMIT WHICH CAN BE FATAL.
Fire Fighting
Flash Point:101F,38C
Lower Limits:0.9%
Upper Limits:6.0%
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, ALCOHOL FOAM AND
WATER FOG.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP
. WATER NOT NORM EFFECTIVE EXTING AGENT. WHEN BURNING PROD GIVES
OFF TOX BY PRODS SUCH AS CARBON (SUP DAT)
Unusual Fire/Explosion Hazard:NONE.
Accidental Release
Spill Release Procedures:PROVIDE ADEQ VENT. REMOVE IGNIT SOURCES FROM
SPILL AREA. UTILIZE SAND, RAGS, PAPER, VERMICULITE, FLOOR
ABSORBENT, INERT MATERIAL AND PLACE IN LEAK-PROOF DRUMS FOR
DISPOSAL. USE PROTECTIVE EQUIPMENT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP OUT OF SURF WATERS & ANY OTHER
COURSES/SEWERS ENTERING/LEADING TO SURF WATERS. DO NOT STORE NEAR
HEAT, SPARKS, OPEN FLAM/OTHER SOURCES OF IGNIT.
Other Precautions:CLOSE CONTR AFTER EACH USE. STORE ONLY IN ORIGINAL
CONTR. WASH W/SOAP & BEFORE EATING, DRINKING, SMKNG/USING TOILET
FACILITIES. AVOID SPONTANEOUS COMBUST OF CONTAM RAGS/OTHER EASILY
ORG ACCUMULATIONS BY IMMED IMMERSION IN WATER. (SUP DAT)
Exposure Controls
Respiratory Protection:IF ADEQUATE VENTILATION CANNOT BE MAINTAINED,
USE NIOSH/MSHA APPROVED RESPIRATORY PROTECTION (TC 23C OR
EQUIVALENT).
Ventilation:PROVIDE CONSTANT FRESH AIR FLOW TO MEET TLV REQUIREMENTS.
OPEN WINDOWS & DOORS TO LET FRESH AIR ENTER DURING APPLICATN.
Protective Gloves:RUBBER/NEOPRENE/VITRON GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS .
Other Protective Equipment:EMERGENCY EYEWASH & DELUGE SHOWER MEETING
ANSI DESIGN CRITERIA .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
SPEC GRAV: 0.854-0.869 (H*2O=1). FIRE FIGHT PROC: MONOXIDE. THEREFORE,
BRTHG OF VAPS & GASES GIVEN OFF DURING BURNING SHOULD BE AVOIDED.
OTHER PREC: EMPTY CONTRS MAY RETAIN RESIDUES OF PROD. DO NOT CU T,
PUNCTURE/WELD ON/NEAR CONTRS. AVOID INHAL & USE ONLY W/ADEQ VENT.
IF EMPLOYEE EXPERIENCES EYE WATERING, HDCH/ (ING 2)
Chemical Properties
Boiling Pt:B.P. Text:313F,156C
Vapor Pres:2.00
Vapor Density:4.8
Spec Gravity:(SUP DAT)
Evaporation Rate & Reference:0.09 (BUTYL ACETATE=1)
Solubility in Water:NIL
Appearance and Odor:CLEAR AMBER LIQUID WITH MILD HYDROCARBON ODOR
Percent Volatiles by Volume:55-63
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE.
Hazardous Decomposition Products:INCOMPLETE COMBUSTION PRODUCES CARBON
MONOXIDE, CARBON DIOXIDE AND UNIDENTIFIED ORGANIC COMPOUNDS.
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE &
FEDERAL REGULATIONS . INCINERATION IS PREFERRED.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.